How To Change Kitchen Sink Faucet

How To Change Kitchen Sink Faucet. Before installing a faucet, make sure you have the correct tools. Enhance the style of your kitchen with a new faucet. Have a bowl handy to catch any residual water, and place the ends of the water lines in the bowl.

Faucet replacement Resilient Plumbing & Heating, Inc.
Faucet replacement Resilient Plumbing & Heating, Inc. from www.resilientplumbing.com

Verify the kitchen sink hole count. Turn the dial on this temperature control towards the cooler side of the faucet (usually to the left).

Turn Them Clockwise And Make Sure There Is No Water Flow.


Attach the new hose to the faucet. Place the new faucet onto the new sink. Loosen the nut under the faucet. Clean the copper tubing with fine sandpaper, then slip the nut, compression ring and valve body over the pipe and tighten.

You May Need Someone To Hold The Faucet Still As You Tighten These To Where The Line Enters The Sink.


Feed the tubes through the center hole one at a time so they’re easier to manage. Before installing a faucet, make sure you have the correct tools. At first, tighten the supply valves. Using your pliers, pull the washer out of place.

If There Is No Water Flow Then You Can Disconnect The Supply Line.


Make sure there are no pieces of rubber or parts of the stem or cartridge left behind. Have a bowl handy to catch any residual water, and place the ends of the water lines in the bowl. Take out the old cartridge with and the washer. The aerator is the most important part of a best kitchen sink faucet, so make sure it’s not damaged.

Place A Bucket Under The Faucet And Turn The Faucet On To Check For Leaks.


Run the faucet lines through the bottom of the sink into the faucet. Determine what type of faucet you currently have. Affix the hardware under the sink. Verify the kitchen sink hole count.

Comments

Popular posts from this blog

Single Handle Kitchen Faucet Repair

Nickel Kitchen Faucet

Old Moen Kitchen Faucet